Comments: Clap On Lamp

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1264336 / about 6 years ago / 1

    Great project! Is there anyway to increase the number of claps it takes to move the servo? Thank you for sharing!

    • There is: you'll need to look for sharp noises in the program and check the time between each set. The example code looks for two sharp noises--you'd need to write some code to look for more than two.

  • hilalgungor / about 6 years ago / 1

    ı made this project, thank you very much for sharing ! :)


If you've found an issue with this tutorial content, please send us your feedback!