Comments: Button and Switch Basics

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #767361 / about 9 years ago / 1

    I'm trying to build an audio switcher with 3 basic 3.5mm inputs and 1 output. I was planning on getting a 4PDT switch that's ON-ON-ON to be able to switch between them, but I'm not sure if that's going to do the trick. Was looking at following a design something like this, but wanted to add an extra input...

    http://www.instructables.com/id/How-to-Construct-a-35mm-Switch-diy/


If you've found an issue with this tutorial content, please send us your feedback!