Tutorials

Single Board Computer Benchmarks

July 31, 2015

How to set up different benchmarking programs on single board computers or computing modules and run them. The results for various generations are shown on the subsequent pages.

nRF24L01+ Transceiver Hookup Guide

July 30, 2015

A basic getting started guided to the SparkFun Transceiver Breakout - nRF24L01+

Adding a Timed Button to a Project

July 29, 2015

This tutorial will walk you through making a timed power controller for interactive projects. You will learn how to add an on button that will provide power to your project for an amount of time and then turn off again.

SparkFun Blocks for Intel® Edison - Pi Block

July 28, 2015

Tutorial on setting up and using the Pi Block for Intel Edison.

SparkFun Blocks for Intel® Edison - Dual H-Bridge

July 17, 2015

A quick overview of the features of the Dual H-bridge Block.

ESP8266 WiFi Shield Hookup Guide

July 16, 2015

Interface your Arduino with an ESP8266 to give it inexpensive access to your WiFi network and the Internet!

Building Large LED Installations

July 16, 2015

Learn what it takes to build large LED installations from planning to power requirements to execution.

Photon IMU Shield Hookup Guide

July 2, 2015

Learn how to use the SparkFun Photon IMU Shield for your Photon device which houses an on-board LSM9DS1 system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer.

Photon Battery Shield Hookup Guide

July 2, 2015

The Photon Battery Shield has everything your Photon needs to run off, charge, and monitor a LiPo battery. Read through this hookup guide to get started using it.

Photon OLED Shield Hookup Guide

July 2, 2015

The Photon OLED Shield has everything you need to add a small yet crisp OLED screen to your Photon projects. This hookup guide will show you how to get started.

Large Digit Driver Hookup Guide

June 25, 2015

Getting started guide for the Large Digit display driver board. This tutorial explains how to solder the module (backpack) onto the back of the large 7-segment LED display and run example code from an Arduino.

Electric Imp Breakout Hookup Guide

June 25, 2015

An electric imp HUG! Provides an overview of the imp card and breakout. Both hardware and firmware subjects are covered.

SparkFun Blocks for Intel® Edison - PWM

June 22, 2015

A quick overview of the features of the PWM Block.

Teensy XBee Adapter Hookup Guide

June 18, 2015

Getting started with the Teensy 3.1 / Teensy 3.2 and XBee. Establishing a serial link.

Teensy Arduino Shield Adapter Hookup Guide

June 18, 2015

A basic introduction and assembly guide for the SparkFun Teensy Arduino Shield Adapter.

Getting Started with the Teensy

June 18, 2015

Basic intro to the Teensy line of products, with soldering and programming suggestions.

Getting Started with Load Cells

June 11, 2015

A tutorial defining what a load cell is and how to use one.

How to Sell Your Widget on SparkFun

June 10, 2015

Have an awesome electronic widget that you want to get to market? We can help resell, or maybe even manufacture it! Find out how.

SD Cards and Writing Images

June 4, 2015

How to upload images to an SD card for Raspberry Pi, PCDuino, or your favorite SBC.

Assembly Guide for RedBot with Shadow Chassis

May 28, 2015

Assembly Guide for the RedBot Kit. This tutorial includes extra parts to follow to go along with the RedBot Inventor's Kit tutorial.

Experiment Guide for RedBot with Shadow Chassis

May 28, 2015

This Experiment Guide offers nine experiments to get you started with the SparkFun RedBot. This guide is designed for those who are familiar with our SparkFun Inventor's Kit and want to take their robotics knowledge to the next level.

Origami Paper Circuits

May 26, 2015

A quick tutorial to get you started in the world of light up origami flowers.

The Great Big Guide to Paper Circuits

May 22, 2015

Let's take a look at different materials we can use to combine paper crafting and electronics.

Sound Page Guide

May 22, 2015

How to use the Lilypad MP3 Player and some Bare Conductive Paint to make a fandom silhouette sound trigger page.
Viewing all 938 Tutorials.

Old Tutorials

Looking for the old, archived tutorials? Head on over to the archived tutorials on the main SparkFun site.
Please be aware that the tutorials you find there are no longer actively maintained.