404

Woah there, Turbo!

Our server gnomes couldn't find the page you are looking for.

It looks like you mistyped the URL in your address bar or have followed an old bookmark.

Perhaps some of these may interest you?

Force Sensitive Resistor - Square

Force Sensitive Resistor - Square

SEN-09376
$12.50
9
LED Tactile Button- White

LED Tactile Button- White

COM-10439
$2.25
1
Jumper Wires Premium 6" M/M - 20 AWG (10 Pack)

Jumper Wires Premium 6" M/M - 20 AWG (10 Pack)

PRT-11709
$6.50
2
SparkFun Qwiic Shield for Thing Plus

SparkFun Qwiic Shield for Thing Plus

DEV-16790
$4.95

How to Make a 3D-Printed D&D Rotating Puzzle Room With OpenForge2.0 and MicroMod

December 9, 2021

Follow this tutorial to build a Rotating Puzzle room for your Dungeon. This project incorporates parts from the OpenForge2.0 project with a few additional 3D-printed components and SparkFun's Qwiic and MicroMod systems to make a rotating puzzle room that can be activated by placing a magnet on the "secret" tile or remotely using a computer, phone, or tablet.

Bobby on 12 Years at SparkFun

August 15, 2023

Bobby reflecting on 12 years working at SparkFun!

MCP4725 Digital to Analog Converter Hookup Guide

September 11, 2014

This is a quick hookup to help you get started with the MCP4725 DAC breakout board. This device allows you to send analog signal from a digital source, like the I2C interface on the Arduino microcontroller.

Qwiic Flex Glove Controller Hookup Guide

July 19, 2018

Is your finger bent? Is your finger straight? The Qwiic Flex Glove controller board will answer this age old question for you with the flex sensor!