Weather

Monitor your environment and log it to the cloud by building your own personal weather station! Or pull data from a server to check out the forecast in your area. Check out the following tutorials to start reading temperature, humidity, pressure, UV, ambient light, hazardous gases, water levels, wind speed and direction, soil moisture, TVOC, eCO2, and even lightning in your environment!

Qwiic Ambient Light Sensor (VEML6030) Hookup Guide

July 18, 2019

The VEML6030 is a high accuracy ambient light sensor with 16-bit resolution. This I2C sensor can detect light similar to the human eye response. Start detecting light levels in your environment!

Qwiic Atmospheric Sensor (BME280) Hookup Guide

August 21, 2019

Measure temperature, humidity, barometric pressure with the SparkFun Atmospheric Sensor Breakout BME280 (Qwiic).

Qwiic Digital Indoor Thermometer

July 15, 2020

Qwiic-ly build a digital indoor thermometer to measure the ambient temperature of the room and display it using an OLED on an I2C bus!

Qwiic Kit for Raspberry Pi V2 Hookup Guide

December 29, 2022

Get started with the SGP40, BME280, VCNL4040, and microOLED via I2C using the Qwiic system and Python on a Raspberry Pi! Measure VOC Index, light, temperature, humidity, and pressure from the environment. Then display them on the microOLED, serial terminal, or the cloud with Cayenne!

Qwiic Pressure Sensor (BMP384) Hookup Guide

June 2, 2022

Get started with the SparkFun Pressure Sensor - BMP384 (Qwiic) following this guide.

Qwiic Pressure Sensor (BMP581) Hookup Guide

July 14, 2022

Get started with the SparkFun Pressure Sensor - BMP581 (Qwiic) following this Hookup Guide

Qwiic TMP117 High Precision Digital Temperature Sensor Hookup Guide

November 14, 2019

Add a high precision, digital temperature sensor to your projects using the TMP117 over the I2C!

Qwiic UV Sensor (VEML6075) Hookup Guide

December 20, 2018

Learn how to connect your VEML6075 UV Sensor and figure out just when you should put some sunscreen on.

RHT03 (DHT22) Humidity and Temperature Sensor Hookup Guide

March 12, 2019

Measure relative humidity and temperature or your environment with the RHT03 (a.k.a DHT22) low cost sensor on a single wire digital interface connected to an Arduino!

Si4707 Hookup Guide

May 29, 2013

Instructions on hooking up to and communicating with the Si4707 Weather Band Radio Breakout using an Arduino.

Si7021 Humidity and Temperature Sensor Hookup Guide

May 5, 2016

The Si7021 humidity and temperature sensor is an easy to use, digital, low-cost sensor to aid you in all your environment sensing needs.

SparkFun Absolute Digital Barometer - LPS28DFW (Qwiic) Hookup Guide

December 8, 2022

Get started adding water-resistant pressure sensing using the SparkFun Absolute Digital Barometer - LPS28DFW (Qwiic) following this guide.

SparkFun Air Quality Sensor - SGP30 (Qwiic) Hookup Guide

June 5, 2020

A hookup guide to get started with the SparkFun Air Quality Sensor - SGP30 (Qwiic).

SparkFun AS3935 Lightning Detector Hookup Guide (v20)

July 25, 2019

Are you worried about the looming clouds in the distance, how far away is that storm exactly? Add lightning detection with the AS3935 to your next weather station or your next bike ride!

SparkFun BME280 Breakout Hookup Guide

October 22, 2015

A guide for connecting the BME280 sensor to a microcontroller, and for using the SparkFun Arduino library.

SparkFun Environmental Sensor Breakout - BME68x (Qwiic) Hookup Guide

May 14, 2020

A hookup guide to get started with the BME68x Environmental Sensor from Bosch. Monitor the air quality, temperature, humidity, and barometric pressure with this Qwiic sensor!

SparkFun gator:environment Hookup Guide

June 13, 2019

The gator:environment combines two I2C sensors for temperature, humidity, pressure, eCO2, and eTVOC values. This tutorial will get you started using the gator:environment with the micro:bit platform.

SparkFun gator:particle Hookup Guide

June 13, 2019

The gator:particle is an I2C heart-rate monitor and pulse oximeter that can be used as a particle sensor. This tutorial will get you started using the gator:particle with the micro:bit platform.

SparkFun gator:soil Hookup Guide

June 13, 2019

The gator:soil is analog soil moisture sensor. This tutorial will get you started using the gator:soil with the micro:bit platform.

SparkFun gator:UV Hookup Guide

September 5, 2019

The gator:UV is an I2C based UV sensor. This tutorial will get you started using the gator:UV with the micro:bit platform.

SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic) Hookup Guide

November 11, 2022

Is your air safe? Check your eCO2, TVOC, and AQI levels with the new SparkFun Indoor Air Quality Sensor - ENS160!

SparkFun Inventor's Kit for Photon Experiment Guide

September 3, 2015

Dive into the world of the Internet of Things with the SparkFun Inventor's Kit for Photon.

SparkFun Thing Plus - NINA-B306 Hookup Guide

March 23, 2023

A quick guide to get started using the SparkFun Thing Plus - NINA-B306. This Thing Plus is loaded with the Arm Cortex-M4 processor in the NINA-B306 along with on-board motion and environmental sensors in the ISM330DHCX 6DoF and BME280 pressure and temperature sensor.
Viewing 53 Weather Tutorials. View All Tutorials.

Old Tutorials

Looking for the old, archived tutorials? Head on over to the archived tutorials on the main SparkFun site.
Please be aware that the tutorials you find there are no longer actively maintained.