Wearables

Diana Eng walks you through a magically appearing design made with an thermochromatic pigment.

Learn how to use a blower and thin sheet plastic to create designs that change shape and volume!

An overview of the updates made in the redesign of the LilyPad Development Board to the LilyPad ProtoSnap Plus and how to adapt code written for the old board to the new one.

Not sure which LilyPad Arduino is right for you? We'll discuss the features of each and help you decide.

A short guide to creating a rainbow of new LilyPad LED colors at home!

A top hat decked out with LED strips makes for a heck of a wedding gift.

Embedded with heating pads and four Neopixel rings, these earmuffs do more than your average winter accessory to keep you warm while still looking good.

This tutorial provides everything you need to know to make your own light up high top sneakers!

A playful, geeky tutorial for a leather bracer that uses a LilyPad Arduino, LilyPad accelerometer, and seven segment display to roll virtual 4, 6, 8, 10, 12, 20, and 100 side dice for gaming.

Everything you need to setup a circuit using ELastoLite super flexible EL Panels from Oryon Technologies.

A basic guide to getting started with the SparkFun EL Sequencer and Escudo Dos to control electroluminescence (EL) wire, panels, and strips.

In this tutorial, we will sew standard electroluminescent (EL) wire to a hoodie.

Learn how to create a light-up dog harness using EL wire for when you need to take your four-legged friend for a walk in the dark.

In this tutorial, we will sew standard electroluminescent (EL) wire to a pair of pants.

Light up the world - and your wrist - with this quick and easy rechargeable firefly LED bracelet.

This guide will help you get started with electroluminescent (EL) wire, tape, panel, chasing wire, and bendable wire to let your project glow!

An introduction to the LilyPad ecosystem - a set of sewable electronic pieces designed to help you build soft, sewable, interactive e-textile projects.

The LilyPad MP3 Player is an amazing little board that contains almost everything you need to play audio files. You can use it to create all kinds of noisy projects, from MP3 hoodies to talking teddy bears. Your imagination is the only limit! This tutorial will help you get started.

The MyoWare® 2.0 Muscle Sensor, an Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies. In this tutorial, we will go over the features and related shields to connect the sensor to a muscle group.

Create a quick and easy piece of e-textile art using a LilyPad LED, battery holder, conductive thread, and coin cell battery.

How to consciously wear light-up and and sound reactive clothing.

An EL project that displays one person's heartbeat on another person's costume.

DIY Project Idea: Create a custom hand warmer blanket using heating pads.

How about that humidity? This tutorial shows how to add sensing capability to the 21st Century Fashion Kit's RGB flower project.