Start a Project
Getting Started with the DA16200 FreeRTOS SDK
September 15, 2022
Interested in the DA16200 FreeRTOS SDK? This guide covers setting up the SDK in the Eclipse IDE and how to program our boards with the DA16200 module.
Getting Started with Necto Studio
March 4, 2022
Necto Studio is a user friendly development environment for users looking to get started with MikroElektronika's MIKROE products.
RedBoard Plus Hookup Guide
July 1, 2021
This tutorial covers the basic functionality of the RedBoard Plus. This tutorial also covers how to get started blinking an LED and using the Qwiic system.
Installing Board Definitions in the Arduino IDE
September 9, 2020
How do I install a custom Arduino board/core? It's easy! This tutorial will go over how to install an Arduino board definition using the Arduino Board Manager. We will also go over manually installing third-party cores, such as the board definitions required for many of the SparkFun development boards.
Getting Started with the Autonomous Kit for the Sphero RVR
December 13, 2019
Want to get started in robotics? Look no further than the SparkFun autonomous kit for the Sphero RVR! Whether you purchased the Basic or Advanced kit, this tutorial will get you rolling...
Basic Autonomous Kit for Sphero RVR Assembly Guide
December 12, 2019
Get your Basic Autonomous Kit for Sphero RVR all hooked up with this guide!
Advanced Autonomous Kit for Sphero RVR Assembly Guide
December 12, 2019
Get your Advanced Autonomous Kit for the Sphero RVR built up with this hookup guide!
SparkFun Inventor's Kit Experiment Guide - v4.1
August 8, 2019
The SparkFun Inventor's Kit (SIK) Experiment Guide contains all of the information needed to build all five projects, encompassing 16 circuits, in the latest version of the kit, v4.1.
Pi Servo pHAT (v2) Hookup Guide
July 11, 2019
This hookup guide will get you started with connecting and using the Pi Servo pHAT on a Raspberry Pi.
LED Gumball Machine
April 24, 2019
Hacking gumball machines to make the world a happier, blinkier place.
SparkFun ESP32 DMX to LED Shield
March 28, 2019
Learn how to utilize your DMX to LED Shield in a variety of different ways.
Beginner Parts Kit Identification Guide
March 22, 2019
The essential parts for beginning (or even experienced) hobbyists that gives you all of the basic through-hole components you will need to get started playing with embedded projects. We'll identify a few parts in the kit and provide a few basic circuits to get started!
RedBoard Qwiic Hookup Guide
January 10, 2019
This tutorial covers the basic functionality of the RedBoard Qwiic. This tutorial also covers how to get started blinking an LED and using the Qwiic system.
October 11, 2018
This is an assembly guide for the SparkFun Flashlight Kit, a basic learn to solder kit.
Getting Started with Electroluminescent (EL) Wire
July 13, 2018
This guide will help you get started with electroluminescent (EL) wire, tape, panel, chasing wire, and bendable wire to let your project glow!
SparkFun Paper Circuit Kits
July 5, 2018
Learn how to build a simple paper circuit using copper tape, a 5mm LED, and a 3V coin cell battery.
Nuclear Battery Assembly Guide
June 8, 2018
How to put together your BYOT (Bring Your Own Tritium) Nuclear Battery Kit!
SparkFun Inventor's Kit Experiment Guide - v4.0
November 15, 2017
The SparkFun Inventor's Kit (SIK) Experiment Guide contains all of the information needed to build all five projects, encompassing 16 circuits, in the latest version of the kit, v4.0a.
Getting Started with the SparkFun Blynk Board
March 25, 2016
How to provision a Blynk Board - get it connected to Wi-Fi and Blynk, so you can start Blynking!
Preassembled 40-pin Pi Wedge Hookup Guide
October 29, 2015
Using the Preassembled Pi Wedge to prototype with the Raspberry Pi B+.
Capacitor Kit Identification Guide
October 1, 2015
Learn how to identify and use a variety of capacitors using the SparkFun Capacitor Kit.
Planning a Wearable Electronics Project
August 13, 2015
Tips and tricks for brainstorming and creating a wearables project.
The Great Big Guide to Paper Circuits
May 22, 2015
Let's take a look at different materials we can use to combine paper crafting and electronics.
How to Solder: Castellated Mounting Holes
May 12, 2015
Tutorial showing how to solder castellated holes (or castellations). This might come in handy if you need to solder a module or PCB to another PCB. These castellations are becoming popular with integrated WiFi and Bluetooth modules.
Looking for the old, archived tutorials? Head on over to the
archived tutorials on the main
Please be aware that the tutorials you find there are no longer actively maintained.