Power

Power is one of the more fundamental concepts in electronics. Check out the following tutorials to reduce current consumption, toggle high power applications, monitor your battery, or charge your LiPo battery safely! Not sure the power requirements of your project? Try checking out the tutorial on how to power your project for some considerations.

Wireless Joystick Hookup Guide

January 5, 2017

A hookup guide for the SparkFun Wireless Joystick Kit.

SparkFun Qwiic Thermocouple Hookup Guide

March 12, 2020

Learn how to hook up your Qwiic Thermocouple Amplifier.

Battery Technologies

February 6, 2013

The basics behind the batteries used in portable electronic devices: LiPo, NiMH, coin cells, and alkaline.

Thing Plus Dual-Port Logging Shield Hookup Guide

June 16, 2022

This tutorial shows you how to hook up and use the SparkFun Thing Plus Dual-Port Logging Shield.

Hookup Guide for the SparkFun RedBoard Artemis

August 28, 2019

Get started with the RedBoard Artemis - all the functionality of the SparkFun Artemis module wrapped in the familiar Uno R3 footprint

MicroMod Ethernet Function Board - W5500 Hookup Guide

March 10, 2022

Add Ethernet and PoE capabilities to your MicroMod project using the Ethernet Function Board - W5500.

Dialog ULP WiFi DA16200 R3 Shield Hookup Guide

October 7, 2021

Add WiFi to your project with this hookup guide for our Dialog's Ultra Low Power DA16200 R3 shield!

FemtoBuck Constant Current LED Driver Hookup Guide v13

December 10, 2015

The FemtoBuck board is a high-efficiency, single-channel constant-current LED driver.

PicoBuck Hookup Guide v12

February 18, 2016

The PicoBuck board is a high-efficiency three-channel constant-current LED driver.

smôl Power Board LiPo Hookup Guide

October 21, 2021

Small in size, small on current draw. It's a smôl world! This guide will get you up and running with the smôl Power Board LiPo.

smôl Power Board AAA Hookup Guide

October 21, 2021

Small in size, small on current draw. It's a smôl world! This guide will get you up and running with the smôl Power Board AAA.

12V/5V Power Supply Hookup Guide

May 10, 2018

In this tutorial, we will replace the 12V/5V (2A) power supply's molex connector with two male barrel jacks adapters.

Hookup Guide for the SparkFun RedBoard Artemis ATP

August 28, 2019

Get started with the RedBoard Artemis ATP - all the functionality of the SparkFun Artemis module wrapped in the Mega Arduino Footprint

INA169 Breakout Board Hookup Guide

November 20, 2013

How to interface with the INA169 Breakout Board to measure current.

Buck-Boost Hookup Guide

May 10, 2019

This tutorial shows you how to hook up and use the SparkFun Buck-Boost board.

SparkFun Qwiic Quad Solid State Relay Kit Hookup Guide

July 16, 2020

A Hookup Guide to get you started with the SparkFun Qwiic Quad Solid State Relay Kit (say that five times fast!).

SparkFun Qwiic Dual Solid State Relay Hookup Guide

September 24, 2020

A Hookup Guide to get you started with the SparkFun Qwiic Dual Solid State Relay.

Qwiic Quad Relay Hookup Guide

January 3, 2019

SparkFun’s Qwiic Quad Relay is a product designed for switching not one but four high powered devices from your Arduino or other low powered microcontroller using I2C.

Qwiic Single Relay Hookup Guide

January 3, 2019

Get started switching those higher power loads around with the Qwiic Single Relay.

IoT Power Relay

May 21, 2018

Using the ESP32 to make a web-configured timed relay.

Power Delivery Board - USB-C (Qwiic) Hookup Guide

February 13, 2020

This guide will go over how to use the USB Type-C Power Delivery Board.

ESP8266 Powered Propane Poofer

March 15, 2016

Learn how Nick Poole built a WiFi controlled fire-cannon using the ESP8266 Thing Dev Board!

Adding a Timed Button to a Project

July 29, 2015

This tutorial will walk you through making a timed power controller for interactive projects. You will learn how to add an on button that will provide power to your project for an amount of time and then turn off again.

LilyPad Basics: Powering Your Project

September 24, 2018

Learn the options for powering your LilyPad projects, LiPo battery safety and care, and how to calculate and consider power constraints on your projects.
Viewing 74 Power Tutorials. View All Tutorials.

Old Tutorials

Looking for the old, archived tutorials? Head on over to the archived tutorials on the main SparkFun site.
Please be aware that the tutorials you find there are no longer actively maintained.