Motion

Good vibes only. Getting started with the Haptic Motor Driver.

A guide to connecting the LIS3DH to a microcontroller and using the Arduino library.

Learn techniques on how to use Finite Impulse Response (FIR) filters and other data-processing tools to turn data into information.

How to use and re-program the 9DoF Razor IMU M0, a combination of ATSAMD21 ARM Cortex-M0 microprocessor and MPU-9250 9DoF-in-a-chip.

Hookup guide for the Serial Controlled Motor Driver

Build a portable digital compass using the SparkFun MicroView and the MAG3110 Magnetometer Breakout.

Basic hookup guide for the TB6612FNG H-bridge motor driver to get your robot to start moving!

Get started with the ADXL345 Accelerometer.

How to connect and use the SparkFun 9 Degrees of Freedom Sensor Stick with an Arduino

Get up and running with the MPU-9250 9-axis MEMS sensor.

An introduction to working with the Electret Mic Breakout Board.

Looking under the hood of the Servo Trigger -- using the development environment and some finer details of the firmware.

How to use the SparkFun Continuous Rotation Servo Trigger with continuous rotation servos, without any programming!

Servos are motors that allow you to accurately control the rotation of the output shaft, opening up all kinds of possibilities for robotics and other projects.

An overview of each component in the SparkFun Sensor Kit, plus links to tutorials and other resources you'll need to hook them up.

An overview of passive infrared (PIR) motion detecting sensors, and how to hook them up to an Arduino.

A series of Blynk projects you can set up on the Blynk Board without ever re-programming it.

A basic guide to get started with the LSM303C 6 Degrees of Freedom Breakout.

A basic guide to get started with the MPU-9150 9 Degrees of Freedom Breakout.

A hookup guide for the LSM6DS3, which features a 3-axis accelerometer, 3-axis gyroscope, and FIFO buffer.

A hookup guide for the LSM9DS1, which features a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. It's an IMU-in-a-chip!

Learn how to use the SparkFun Photon IMU Shield for your Photon device which houses an on-board LSM9DS1 system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer.

This Experiment Guide offers nine experiments to get you started with the SparkFun RedBot. This guide is designed for those who are familiar with our SparkFun Inventor's Kit and want to take their robotics knowledge to the next level.

A basic hookup guide for getting started with the SparkFun Wake-on-Shake. The board gives you the ability to put your project into hibernation until bumped or shaken awake using the ADXL362 accelerometer. This means you can design projects meant to stay inert for long periods of time, possibly even several years, depending on the battery type used to power the project.