Logging

A weather station kit that is built on top of the inexpensive, easy-to-use micro:bit and Microsoft MakeCode.

A hookup guide for the SparkFun Mini GPS Shield.

This project covers how to log data to Google Sheets two ways: using IFTTT with a web connection or a USB pen drive and "sneakernet" without.

How to use and re-program the 9DoF Razor IMU M0, a combination of ATSAMD21 ARM Cortex-M0 microprocessor and MPU-9250 9DoF-in-a-chip.

The SparkFun ESP8266 Thing Dev Board is a powerful development platform that lets you connect your hardware projects to the Internet. In this guide, we show you how to combine some simple components to remotely log temperature data, send yourself texts and control lights from afar.

Build a portable gas monitor to check for dangerous levels of hazardous gases.

Learn how to build a remote water level sensor for a water storage tank and how to automate a pump based off the readings!

An introduction to working with the OpenLog data logger.

A series of Blynk projects you can set up on the Blynk Board without ever re-programming it.

How to use the level translating µSD device.

How to assemble and hookup the SparkFun GPS Logger Shield. Never lose track of your Arduino again!

A guide for connecting the BME280 sensor to a microcontroller, and for using the SparkFun Arduino library.

Adding external storage in the form of an SD or microSD card can be a great addition to any project. Learn how in this hookup guide for the microSD shield and SD breakout boards.

Basic introduction and hook-up guide for the SparkFun Logomatic.

A guide to using the Vernier Shield