Internet of Things

The MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your applications.

Add IoT functionality to any MicroMod project with the MicroMod WiFi function Board - DA16200!

Small in size, small on current draw. It's a smôl world! This guide will get you up and running with the smôl ESP32 Processor Board.

Small in size, small on current draw. It's a smôl world! This guide will get you up and running with the smôl ecosystem.

Add WiFi to your project with this hookup guide for our Dialog's Ultra Low Power DA16200 R3 shield!

A guide to get you started with the SparkFun LTE GNSS Breakout - SARA-R5. This breakout features the SARA-R5 module from u-blox.

Looking to use the more secure ESP32-S2? Follow this hookup guide to get started.

Follow this guide to learn how to use the MicroMod Update Tool to interact directly with the UART on the MicroMod Asset Tracker's SARA-R5. Using this board you can talk directly to the module using u-blox's m-center software as well as update the firmware using EasyFlash.

Get started with the SparkFun MicroMod Asset Tracker Carrier Board following this Hookup Guide. The Asset Tracker uses the u-blox SARA-R510M8S LTE-M / NB-IoT module to provide a host of data communication options.

Get started with the MicroMod nRF52840 Processor following this guide.

Learn how to affix a GNSS antenna, use PPP to get its ECEF coordinates and then broadcast your own RTCM data over the internet and cellular using NTRIP to increase rover reception to 10km!

Need a great project for your Raspberry Pi 4 kit? Use it to create a command center to display the weather, clock, your calendar, or even a news feed!

Guide for hooking up your Raspberry Pi 4 Model B basic, desktop, or hardware starter kit together.

Learn how to use some of the standard features of the SparkFun Cryptographic Co-processor.

Get to know your Edge board, including both the hardware features for you to utilize as well as how to get talking to it.

Get started with our SparkFun Artemis Thing Plus - our popular Thing Plus footprint with the powerful Artemis module for ultimate functionality.

The goal of this project is to have a website hosted on an ESP32 that controls any relay controlled device connected to a local network and keeps a dynamically updated state of those devices.

Get started with the RedBoard Artemis ATP - all the functionality of the SparkFun Artemis module wrapped in the Mega Arduino Footprint

Get started with the RedBoard Artemis - all the functionality of the SparkFun Artemis module wrapped in the familiar Uno R3 footprint

Get started with the powerful RedBoard Artemis Nano

Get started with SparkFun's XBee3 Thing Plus - both the u.FL as well as the PCB antenna versions.

Let's chat about layout and design considerations when using the Artemis module.

Get our powerful Artemis based boards (Artemis Nano, BlackBoard Artemis, and BlackBoard Artemis ATP) blinking in less than 5 minutes using the SparkFun Artemis Arduino Core!

An introduction to Home Assistant, an open source home automation hub.