Hookup

How to hook the HMC6343 -- a high-end, tilt-compensated compass module -- up to an Arduino. Never get lost again!

Your guide to the Digital Sandbox! 16+ experiments that, using a graphical programming language, teach you to blink LEDs, monitor microphones, read temperature, and much more.

Let's take the same examples from the ArduBlock-based Digital Sandbox guide, and implement them using Arduino code.

Breakout of MS5803-14BA Pressure Sensor to measure the absolute pressure of the fluid around them to determine altitude, water depth, or any other tasks that require an accurate pressure reading. This includes air, water, and anything else that acts like a viscous fluid.

How to get started using both the ADXL337 and ADXL377 3-axis accelerometers with analog outputs.

Learn how to create your very own heart rate monitor.

Skip the bootloader and load your program directly onto an AVR with the AVR Pocket Programmer.

A guide to help you integrate the ISL29125 RGB light sensor breakout board into your electronic projects.

How to assemble and modify the SparkPunk Sound Generator kit.

How to get started using the MMA8452Q 3-axis accelerometer -- a solid, digital, easy-to-use acceleration sensor.

How to get started with an XBee Shield and Explorer. Create a remote-control Arduino!

An introduction to being able to trigger music and sound effects based on buttons, sensors, or switches using the WAV Trigger board.

Basic introduction and hook-up guide for the SparkFun Logomatic.

Using the MiniGen, SparkFun's Arduino Pro Mini signal generator shield

Learn how to get started making your own capes for the BeaglBone Black using the BeagleBone Proto Cape.

How to charge your LiPo batteries with the USB LiPo charger. Plus how to modify your charger to set the charge current.

Learn how to assemble and use the TL431 in the Uh-Oh Battery Level Indicator Kit.

Learn how to assemble and play the Binary Blaster Game from SparkFun Electronics.

Get up and running quickly with this simple to use UV sensor.

T5403 Barometric Pressure Sensor Hookup Guide

How to start working with the OBD-II Uart board.

How to assemble, connect to, and use the LSM9DS0 -- an accelerometer, gyroscope, and magnetometer all-in-one.

The Sound Detector is a microphone with a binary output. This guide explains how it works and how you can use it in your projects.

This breadboard has a couple of tricks up it's sleeve!