Eagle

Eagle is one of many PCB CAD softwares out there. Once a project is past the prototyping phase, it will usually end up on a PCB. If you plan on making the circuit more than a few times, you may want to look into designing the circuit with a CAD software (i.e. Eagle) to save time wiring the project or if you plan on shrinking the size of the overall circuit. Check out the following tutorials to get started making your own custom PCB. Not sure where to start? Try looking at How to Install and Setup Eagle tutorial. Or check out this flowchart of tutorials and tools to help guide you bring your concept to a finished PCB design.

Constant Innovation in Quality Control

December 11, 2013

In this article, we share our recent advancements in quality control. Along with making our tests more thorough, we have also made them more efficient and robust.

Designing PCBs: Advanced SMD

December 10, 2012

Advanced Eagle layout for PCBs with SMD devices.

Designing with MicroMod

October 21, 2020

This tutorial will walk you through the specs of the MicroMod processor and carrier board as well as the basics of incorporating the MicroMod form factor into your own PCB designs!

Designing with the SparkFun Artemis

June 20, 2019

Let's chat about layout and design considerations when using the Artemis module.

How to Install and Setup EAGLE

September 5, 2013

Not just how to download and install EAGLE, but how to install the SparkFun EAGLE Libraries and scripts.

How to Read a Schematic

July 12, 2013

An overview of component circuit symbols, and tips and tricks for better schematic reading. Click here, and become schematic-literate today!

How to Sell Your Widget on SparkFun

June 10, 2015

Have an awesome electronic widget that you want to get to market? We can help resell, or maybe even manufacture it! Find out how.

Importing Custom Images into Eagle

December 5, 2016

How to create custom graphics and import them into Eagle for silk, copper, etc.

Making Custom Footprints in EAGLE

September 27, 2013

This tutorial will show you how to make custom, 1:1 footprint for any IC in EAGLE.

Raspberry Pi Stand-Alone Programmer

March 8, 2018

This tutorial will show you how to use a headless Raspberry Pi to flash hex files onto AVR microcontrollers as a stand-alone programmer. It also tells the story about production programming challenges, how SparkFun came to this solution, and all the lessons learned along the way.

Using EAGLE: Board Layout

September 5, 2013

Part 2 of the Using Eagle tutorials, this one covers how to lay out a board after designing a schematic.

Using EAGLE: Schematic

September 5, 2013

How to design a PCB in EAGLE using through-hole parts.

Old Tutorials

Looking for the old, archived tutorials? Head on over to the archived tutorials on the main SparkFun site.
Please be aware that the tutorials you find there are no longer actively maintained.