Arduino

Assembly Guide for the RedBot Kit. This tutorial includes extra parts to follow to go along with the RedBot Inventor's Kit tutorial.

The AST CAN485 is a miniature Arduino in the compact form factor of the ProMini. In addition to all the usual features it has on-board CAN and RS485 ports enabling quick and easy interfacing to a multitude of industrial devices.

The AST-CAN485 I/O Shield is an Arduino shield that will allow the user to interface the AST-CAN485 Dev Board with 24V inputs and outputs, which expands its usefulness into industrial systems.

Hookup Guide for the AST-CAN485 WiFi Shield.

A bare minimum Arduino compatible breakout using a ATtiny84 for integration into your small projects!

The SparkFun Audio Codec Breakout - WM8960 is a low power, high quality stereo codec chock full of features. In this tutorial, some of these features by using an Arduino microcontroller to configure the audio codec and pass audio to the headphone or speaker channels.

The AVR-based Qwiic Serial Enabled LCDs are a simple and cost effective solution to include in your project. These screens are based on the HD44780 controller, and include ATmega328P with an Arduino compatible bootloader. They accept control commands via Serial, SPI and I2C (via PTH headers or Qwiic connector). In this tutorial, we will show examples of a simple setup and go through each communication option.

The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. We'll highlight key features of the board and show you to get started with the development board. A few Arduino examples will be highlighted to connect to a WiFi router, calculate the Fast Fourier Transform (FFT) from an input microphone, output an analog signal to a speaker, and connect an Qwiic-enabled device.

This tutorial shows users how to solder their SparkFun interactive badges as well as put them to use in other projects.

Make a Breakout clone with the BadgerHack Gaming Add-On Kit.

Turn your Badger or Redstick into a temperature and soil moisture sensing display with the BadgerHack Sensor Add-On Kit

Make a tiny synth with BadgerStick.

Liquid crystal displays (LCDs) are a great way to output a string of words or sensor data to a display for visual feedback. In this tutorial, we'll learn about LCDs, how to print a string of words to a 16x2 basic character LCD and create custom characters.

Let's have some fun with LEDs! We'll explore LEDs once again with the SparkFun RedBoard Qwiic, making cool effects, and putting those effects to work using a sensor.

An introductory tutorial demonstrating several ways to use and interact with servo motors!

An introduction and getting started guide for the Battery Babysitter - a flexible LiPo battery charger and monitor.

This is a guide for assembling and basic use of the Beefcake Relay Control board

How to get started with the SparkFun Big Easy Driver.

How to get your computer set up with Arduino and the Blynk Board hardware definitions -- so you can start creating Blynk projects of your own!

A Blynk project that demonstrates how to use the Bridge widget to get two (or more) Blynk Boards to communicate.

Make a Step Sequencer using an Arduino, the Auduino firmware, and a handful of hardware.

Follow this tutorial to build your own custom jukebox. Note, this is designed simple and tough for use primarily with toddlers. It's also a great introduction to SparkFun's Qwiic products!

How to crack an unknown safe in under an hour.

An introduction to matrix scanning, using the SparkFun 4x4 Button Pad.