Arduino

Add IoT functionality to any MicroMod project with the MicroMod WiFi function Board - DA16200!

A hookup guide for the Qwiic 6DoF (LSM6DSO), which features a 3-axis accelerometer, 3-axis gyroscope, temperature sensor, and FIFO buffer.

This carrier board takes advantage of the MicroMod, Qwiic, and the mikroBUS™ ecosystems and allows users to take advantage of the growing number of 7 MicroMod processor boards, 83 Qwiic (add-on) boards, and +1100 drop-in Click boards™, which equates to +51M different board combinations. Click to learn more.

Getting started with the AMS dToF imagers (TMF8820 and TMF8820).

An introduction to Home Assistant, an open source home automation hub.

An introduction to MQTT, one of the main communication protocols used with the Internet of Things (IoT).

Playing MP3s has never been easier.

In this tutorial, we will connect different RGB LED matrix panels to PixelMatix's SmartLED shield and Teensy.

A hookup guide to get started with the BME68x Environmental Sensor from Bosch. Monitor the air quality, temperature, humidity, and barometric pressure with this Qwiic sensor!

Get started with some customizable MicroMod data logging with the Data Logging Carrier Board.

Get started with the RedBoard Artemis - all the functionality of the SparkFun Artemis module wrapped in the familiar Uno R3 footprint

Get started with sound monitoring using the SparkFun analog MEMS microphone breakout board with Arduino!

A Hookup Guide to get you started with the Qwiic Alphanumeric Display.

A guide for connecting the BME280 sensor to a microcontroller, and for using the SparkFun Arduino library.

Everything you need to get started with the 1W LoRa MicroMod function board; a MicroMod function board that provides LoRa capabilities for your MicroMod project. Must be used in conjunction with a MicroMod main board and processor.

Add up to 8 extra I/O pins to your microcontroller with the SparkFun Qwiic GPIO. Get started with the Qwiic GPIO in this Hookup Guide.

Add Ethernet and PoE capabilities to your MicroMod project using the Ethernet Function Board - W5500.

The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This function board includes three sensors to monitor air quality (SGP40), humidity & temperature (SHTC3), and CO2 concentrations (STC31) in your indoor environment. To make it even easier to use, all communication is over the MicroMod's I2C bus! In this tutorial, we will go over how to connect the board and read the sensors.

Add WiFi to your project with this hookup guide for our Dialog's Ultra Low Power DA16200 R3 shield!

The RP2040 is the first microcontroller from the Raspberry Pi Foundation. Updated with the new mikroBUS™ socket, the RP2040 development board expands its horizons with a growing ecosystem of +1100 drop-in Click boards™. Click to learn more.

The FemtoBuck board is a high-efficiency, single-channel constant-current LED driver.

The PicoBuck board is a high-efficiency three-channel constant-current LED driver.