RedBot Assembly Guide Rev 02
This Tutorial is Retired!
This tutorial covers concepts or technologies that are no longer current. It's still here for you to read and enjoy, but may not be as useful as our newest tutorials.
Contributors:
HelloTechie, 
SFUptownMaker
HelloTechie, SFUptownMaker 
RedBot Accelerometer
Time to add the RedBot accelerometer! If you do not have headers on your accelerometer already (older revisions of the RedBot accelerometer did not have headers), we recommend soldering on female headers to your accelerometer to fit on top of the RedBot Mainboard's female headers.
Locate the Following:
| 1x RedBot Accelerometer |
 |
Adding the RedBot Accelerometer
Locate the position on the RedBot Mainboard to add the accelerometer. Line up the "A4" pin on the accelerometer to the "A4" male header pin in the "SENSOR" section on the RedBot Mainboard.
