404

Woah there, Turbo!

Our server gnomes couldn't find the page you are looking for.

It looks like you mistyped the URL in your address bar or have followed an old bookmark.

Perhaps some of these may interest you?

Rocker Switch - SPST (right-angle)

Rocker Switch - SPST (right-angle)

COM-08837
$1.05
SparkFun LED Driver Breakout - LP55231

SparkFun LED Driver Breakout - LP55231

BOB-13884
$10.50
Alchitry Io Element Board

Alchitry Io Element Board

DEV-17278
$26.95
4
WS2812B 5050 5x5mm SMD addressable RGB LED (Cut Tape)

WS2812B 5050 5x5mm SMD addressable RGB LED (Cut Tape)

COM-24837
$0.75

Let's Put A Pin-Out In It

March 25, 2022

The BME280 Atmospheric Sensor Breakout is one of our more popular sensor boards and now you can get it with pre-soldered headers! We also have more products from BreadBoard Mates!

Dead Reckoning? More Like Dead On!

March 1, 2024

A new version of the SparkFun GPS-RTK Dead Reckoning Kit is now available!

LilyPad Development Board Hookup Guide

July 28, 2011

The LilyPad Development Board is a sewable electronics prototyping board that you can use to learn circuits and programming with Arduino, then break apart to make an interactive fabric or wearable project.

Qwiic Pro Kit Project Guide

November 7, 2019

The Qwiic Pro Kit was designed to allow users to get started with Arduino without the need for soldering or a breadboard. We've included three inputs (a joystick, accelerometer, and proximity sensor) and one display that can be daisy chained to the RedBoard Turbo (SAMD21) Development Board.