404

Woah there, Turbo!

Our server gnomes couldn't find the page you are looking for.

Ack! We pointed you in the wrong direction. You can use your browser's "back" button to get where you were before or use the search box to find what you're looking for.

It looks like this is our problem, so we've been notified that you followed this broken link. Hey, nobody's perfect, right?

Perhaps some of these may interest you?

SparkFun Safety Glasses

SparkFun Safety Glasses

SWG-11046
$4.95
3
SparkFun USB Thumb Drive (16GB)

SparkFun USB Thumb Drive (16GB)

SWG-14658
$9.95 $3.47
1
ESP32 WROOM MCU Module - 8MB (Dual Antenna)

ESP32 WROOM MCU Module - 8MB (Dual Antenna)

WRL-19899
$4.50
USB-C to USB-C Silicone Power Charging Cable - 3m

USB-C to USB-C Silicone Power Charging Cable - 3m

CAB-24060
$9.95

Industrial Flight and Magic

November 5, 2021

The new Qwiic VL53L5CX ToF Imager is here with our last two Alphanumeric Display options, as well as an Ethernet Kit for Teensy 4.1.

Tech For Good

July 20, 2023

We're switching things up today with a post that highlights some of the resourceful and inspirational projects we've seen on Hackster lately.

Using Flask to Send Data to a Raspberry Pi

November 9, 2017

In this tutorial, we'll show you how to use the Flask framework for Python to send data from ESP8266 WiFi nodes to a Raspberry Pi over an internal WiFi network.

Qwiic Kit for Raspberry Pi V2 Hookup Guide

December 29, 2022

Get started with the SGP40, BME280, VCNL4040, and microOLED via I2C using the Qwiic system and Python on a Raspberry Pi! Measure VOC Index, light, temperature, humidity, and pressure from the environment. Then display them on the microOLED, serial terminal, or the cloud with Cayenne!